A caustic-free traffic film remover with a pH value of 10.5 that is mild on surfaces, yet removes heavy soiling rapidly.
This concentrated blend of graded surfactants with class 8 corrosion inhibitors, designed to remove traffic film, oil and grease from vehicles. Non Caustic TFR is a safer alternative traffic film remover for use in the road haulage industry.
Caustic free - pH 10.5 when undiluted
Mild on surfaces
Low odour - user-friendly
DIRECTIONS:
Check surface compatibility prior to application.
PRESSURE WASHER: - Adjust the detergent feed according to the level of soiling of the surface to be cleaned. Rinse off thoroughly with water.
LOW PRESSURE SPRAY - Apply diluted solution and allow 2-5 minutes contact time. Rinse off thoroughly with hot or cold water.
Pressure Washer Non caustic TFR would normally be diluted with water before use:Vehicle bodywork: 1 part Non caustic TFR - 4 parts water. Chassis cleaning: 1 part Non caustic TFR - 1 part water. Adjust the detergent feed rate as required, but always try and ensure that this is kept to a minimum whilst maintaining the desired cleaning action. Lightly pre-spray the whole vehicle before removing soil and traffic film using even sweeps of the lance at high pressure and at temperatures up to 70C. Turn off the detergent feed and thoroughly rinse the vehicle. CAUTION
: Product must always be tested on alkali sensitive surfaces before use. Never use this product in direct sunlight or allow the product to dry out on the surface or staining may result.
